Dillon Case Feeder Enhancement Kit

Description

Dillon Case Feeder Enhancement Kit. Condition is New. Shipped free to the US with USPS First Class. Shipping available for Canadian customers at the eBay calculated cost.
This is the "COMBO - LARGE AND SMALL PISTOL" kit that has paddles for both the Large
(Dillon
21072
)
and Small Pistol
(Dillon
21073
)
plate wheels, six washers of 2,3 and 4mm thickness, plus the case feed stop. The kit IS NOT limited to the Dillon XL650/750 series, it will work with any Dillon press that uses the specified Case Feed Plate part numbers.
The Dillon Case Feeder
Enhancement
Kit is designed to prevent the “logjam” effect seen when using cartridge brass such as 7.62x39, .300 Blackout or .223/5.56mm in the Dillon Case Feeder system with their Large Pistol (
21072
) and Small Pistol (21073) plate wheels. It does this with a specially designed “paddle” that pushes the entrained cases up out of the way, and turns the cases piled on top of them to a different orientation so that they stay randomized in the hopper. Basically, it's a agitator for your case feeder! Use the Large Pistol paddle for 7.672x39 or .300 Blackout and the Small Pistol paddle for .223/5.56 cases.
The kit also includes two sets of the three washers of different thicknesses that will let you adjust the plate height to help improve the "drop rate" of cases into the slots in the case feeder plate wheels. The Dillon washer costs a total of about with shipping, and being stamped and galvanized, is not a consistent thickness. I found the 4mm washer worked best with my 7.62x39 cases and the kits contain two sets 2mm, 3mm and the 4mm washer so you can experiment and fine-tune your setup.
Finally, the kit includes a nifty Case Feed Stop that will prevent the feeding of new cases while you do other operations on the press. I find it very helpful when processing cases that need a bit of rework, such as cases that got primed, but got a short fill of powder, or ones that need the bullet seating depth tweaked or cases re-crimped. The case feed stop stores on the press when not in use.
These are all 3D printed parts, made with tough and durable polyethylene and urethane plastics.
For other custom products for the Dillon Press, please visit my user page!