Dillon 550 / XL650 / XL750 / 1050 Reloading Press Die Finger Wrench 1" lucknut

Description

This Auction is for ONE 3D Printed  2.1" Tall Finger Wrench Hand tool for 1" Locknuts .
Please
Visit
my
eBay
Store for
different
Lengths and sizes of reloading
Finger Wrenches and reloading related parts
This is a 1" locknut Finger Wrench
With it , you can very Quickly and Easily make adjustments to your dies .
Unlike most other versions out there. I designed this tool to be easy to use , Comfortable in your hand and most importantly LAST .
1: Works with either Progressive or Single stage presses.
2: The gripping area is 1.780 in diameter and is .500 thick .
3: There two .125 spanner holes on the side of the gripping area should you need them.
4: Tool is 2.1" long to help clear other dies installed on your toolhead.
4: The wall thickness where the locknut contacts the tool is .185 at it thinnest part and .250 at the thickest.
5:This is a Multi infill print. The first .500 of the tool where the locknut is inserted to the part is 100% infill.  The remainder is 40% infill.
This type of infill takes a lot longer to make , but I want you to have a tool that you know is going to last and be capable of doing the job your buying it for .
6: Locknut size is clearly marked with large easy to read lettering on two sides of the tool.
ALL designs are my own and I do all my own printing .  If you have any Questions or Issues Please let me know.
As an advid reloader myself , My goal is to offer you the following .
1.  Design As many features and improvements into a part as possible to make your reloading faster, easier and more precise .
2 . Offer the Highest quality prints as possible.
3.  Offer The Lowest cost as possible.