2 Case Ejectors For Dillon XL650 / 750 BEARING / BUSHING Style

Description

2 Case Ejectors For Dillon XL650 / 750 Upgrade Parts Replaces OEM Wire Ejector. Condition is "New".
As an advid reloader myself , My goal is to offer you the following .
1.  Design As many features and improvements into a part as possible, to make your reloading faster, easier and more precise .
2 . Offer the Highest quality prints as possible.
3.  Offer The Lowest cost as possible.
ALL designs are my own and I do all my own printing .  If you have any Questions or Issues Please let me know.
This listing is for TWO 3D Printed BEARING / BUSHING style Case Ejectors  ( If you need NONE Bearing / Bushing Type Please see my other listing )
This case ejector has been tested on .380 acp up to 45 acp . Also .223/5.56
This is a 3D printed part and is My Redesign to fix issues I've ran into with some of the current available Ejectors designs.
1. Moved the location of the setscrew and square nut, so you can access it when the shellplate has cases / rounds in it. .
2. Added fillets and thickened up the area where the square nut is located to help prevent stretching.
3. Increased clearance between the ejector and the case insert slide to prevent binding and to ensure case insert slide has full travel.
4. Increased  clearance between case insert slide and the finished round chute . Allows for more caliber uses and the ability to adjust rotation for the perfect case ejection
5 The hardware is stainless steel .
This part works on the Dillon XL650/XL750