1978-1988 Oldsmobile Cutlass Supreme Custom Dash Insert and Radio Bezel G-Body

Description

The main image shows a completed setup.  The maroon dash surround is not included and only shown for demonstration purposes.  Gauges and indicator lights are also not included.
These pieces were designed to work with each other, and not the stock parts.  If you choose to replace only part of your dash, there may be gaps or overlapping preventing parts from properly interfacing.  We recommend replacing all the dash pieces at once.
Parts are 3D Printed from black PETG filament.  Very strong, very smooth.  Customer is responsible for final finishing of parts.  The finishing methods with the best results are hydro dipping or vinyl wrapping.  If you choose to paint the parts, contact your paint supplier and make sure the paint is compatible with PETG plastic.
Gauge sizes are 3-3/8 for speedo/tach, and 2-1/16 for smaller gauges.
The left side vent will ONLY work on vehicles with the square light switch.  If someone wants to send us a push/pull light switch we will happily model it and make that available.
The right vents are available in three models.  A double 2-1/16 (Option 1) gauge, which will require some slight trimming of the dash behind the gauges.  The single version for 2-1/16 (Option 2) or 2-5/8 (Option 3) diameter gauges require no modifications.
Both the left and right vent insert use the stock vents and vent retaining clips.  Vents are customer supplied and NOT included.
The center dash insert uses the stock screws and bolts directly in place.  The purple line in the photo shows what is visible to the driver.
The left, right inserts and radio bezel use the stock retaining clips (customer supplied) and simply snap into place like the factory piece.
If you have a specific design you would like, please contact us and we'll try to accommodate.